Battery pack

Datasheet

IQ Home Battery Pack

BP-UPS-01 Datasheet

Contents

​1.​ Specifications  3

​2.​ Dimensions  4

​3.​ Typical usage  5

​4.​ Typical connections  5

​4.1.​ One UPS  5

​4.2.​ More UPS  6

​4.3.​ Installation for different power supplies  7

​5.​ Setup  8

​5.1.​ Meaning of status LEDs  8

​5.1.1.​ Charging  8

​5.1.2.​ Discharging  8

​5.1.3.​ Battery full  8

​5.1.4.​ Heating  8

​5.2.​ Installing position  9

​5.3.​ Protection fuse  9

​6.​ For your safety  10

​6.1.​ WARNINGS  10

​6.2.​ Transport regulations  11

​6.3.​ Notices  12

​7.​ Contact Us  12

​1.​ Specifications

Model

BP-UPS-01

Input voltage

10 - 16 V DC

Output Voltage

Minimum power supply requirement

15W

Expected backup time

approximately 12 hour

Local state feedback

Input power

INPUT POWER is lighting

Charging

CHARGING is lighting

Low temperature

LOW TEMP is lighting

Environmental conditions

Storage temperature

from -20°C to +60°C

Operation temperature

from -20°C to +60°C

Charging range

from 0°C to +45°C

Heating range (Internal heating on)

from -20°C to +5°C

Relative humidity

from 0 % to 85 %

Mechanical and enclosure specification

Product dimension (outline)

87,6mm(W) x 90mm(H) x 65,2mm(D)

Mount type

DIN Rail mountable

Enclosure material

ABS

Body colour

Light gray

Product weight

350 g

Enclosure protection level

IP35

Accessories

Jumper cable, Fuse 3A

All setup should be examined by a qualified technician!

​2.​ Dimensions

(Unit: mm , tolerance ± 0.5mm)

ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15

​3.​ Typical usage

●   Where electricity is available only during off-peak hours (at night). E.g.: outdoor lighting

●   As uninterruptible power supply (UPS)

​4.​ Typical connections

​4.1.​ One UPS

The recommended power supply is MeanWell HDR-15-15.

​4.2.​ More UPS

​4.3.​ Installation for different power supplies

CAUTION!

This connection brings the different power supplies to equipotential.


​5.​ Setup

​5.1.​ Meaning of status LEDs

​5.1.1.​ Charging

​5.1.2.​ Discharging

​5.1.3.​ Battery full

​5.1.4.​ Heating

​5.2.​ Installing position

​5.3.​ Protection fuse

ATTENTION!

The fuse is packaged separately so it must be inserted into the device before the first using. Its position is shown in the picture above.


​6.​ For your safety

To prevent damage to your product or injury to yourself or to others, read the following safety precautions before using this equipment. Keep these safety instructions where all those who use the product will read them.

​6.1.​ WARNINGS

To prevent damage to your product or injury to yourself or to others, read the following safety precautions before using this equipment. Keep these safety instructions where all those who use the product will read them.

​6.2.​ Transport regulations


​6.3.​ Notices

This symbol indicates that this product is to be collected separately.

This symbol on the battery indicates that the battery is to be collected separately.

  • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
  • For more information, contact the retailer or the local authorities in charge of waste management.

  • All batteries whether marked with this symbol or not, are designated for separate collection at an appropriate collection point.
  • Do not dispose of as household waste. For more information, contact the retailer or the local authorities in charge of waste management.

​7.​ Contact Us

IQ HOME Kft.

Address: 1139 Budapest, Forgách utca 32. 5. ép. 3. em. 312., Hungary

Email: info@iqhome.org

Website: www.iqhome.org

©2020 IQHome Kft

www.iqhome.org

 /