AC-RLD-01 Wireless Dual Relay Actuator
AC-RLD-01 is a DIN-rail wireless actuator with two independent SPDT relays. It is part of the IQ Home actuator family and communicates over IQRF-DPA, allowing lighting, heating and other electrical loads to be controlled without dedicated control wiring to each relay.
Typical applications include industrial and outdoor lighting, heating control and other on/off switching tasks in building and industrial systems.
Key features
- Two independent SPDT relays
- Max. switching voltage: 277 V AC or 30 V DC
- Max. switching current: AC 10 A (NO) / 3 A (NC); DC 5 A (NO) / 3 A (NC)
- Max. switching capacity: 2500 VA / 150 W (NO), 750 VA / 90 W (NC)
- IQRF-DPA 3.02 and IQRF-OS 4.02
- Supports acknowledged FRC commands and control of multiple relays in one RF command
- Timeout and boot-up control for defined states after network interruptions
- DIN-rail and wall mounting, IP20 enclosure
Installation and electrical data
The actuator is powered from 230 V AC. Typical consumption is 0.2 W with both relays off and up to 1.5 W with both relays on during RF communication. Operating temperature: -30 to +70 °C. Dimensions: 34 × 65 × 90 mm; weight: 150 g.
Relay contacts must be sized and protected for the connected load. Electrical installation must be carried out by a qualified person in accordance with local regulations.
Package contents
Package contains: AC-RLD-01 Dual Relay Actuator.
| Relay specification | |||||||||||||
| Number of relays | 2 | ||||||||||||
| Contacts configuration | SPDT – Single Pole Double Throw | ||||||||||||
| Max. switching voltage | 277 VAC, 30 VDC | ||||||||||||
| Max. switching current | AC: 10 A (NO)/3 A (NC) DC: 5 A (NO)/3 A (NC) |
||||||||||||
| Max. switching capacity | 2500 VA, 150 W (NO) |
||||||||||||
| Life expectancy | Mechanical: 10,000,000 operations (18,000 operations per hour) |
||||||||||||
| RF Specifiaction | |||||||||||||
| Communication technology | IQRF - DPA | ||||||||||||
| Communication module | DCTR-76D(A) | ||||||||||||
| IQRF-OS verision | 4.02 | ||||||||||||
| IQRF-DPA verision | 3.02 | ||||||||||||
| RF mode | Low Power (STD on special request) | ||||||||||||
| RF band | 868 MHz (916 MHz on special request) | ||||||||||||
| RF output power | 8 mW | ||||||||||||
| Antenna | Internal, PCB | ||||||||||||
| Local display and control | |||||||||||||
| State feedback | LED (Red/Green) | ||||||||||||
| Environmental conditions | |||||||||||||
| Operation temperature | -30 °C to 70 °C | ||||||||||||
| Storage temperature | -30 °C to +70 °C | ||||||||||||
| Relative humidity | 0 % to 85 % | ||||||||||||
| Electrical specification | |||||||||||||
| Input power supply / Input voltage | 230 VAC | ||||||||||||
| Power consumption |
|
||||||||||||
| Mechanical and enclosure specification | |||||||||||||
| Product dimension (outline) | 34mm(W) x 65mm(D) x 90mm(H) | ||||||||||||
| Mount type | DIN Rail mountable | ||||||||||||
| Enclosure colour | Light gray | ||||||||||||
| Product weight | 150 g | ||||||||||||
| Enclosure protection level | IP20 | ||||||||||||
Tags: AC-RLD-01, IQ Home, dual relay actuator, IQRF-DPA, DIN rail, lighting control, heating control