Modbus TCP/IP Data Output

Modbus TCP/IP Data Output

IQ Home gateways can expose data from wireless IQRF-DPA devices through Modbus TCP/IP. This allows PLCs, SCADA systems and CODESYS applications to read sensor and energy values using standard Modbus registers without a separate wireless driver.

Typical applications

  • Reading environmental sensor values from a PLC
  • Collecting energy-meter data in SCADA systems
  • Building dashboards and control logic in CODESYS
  • Extending wired Modbus systems with wireless devices

Sensor network system

How the network works

IQ Home wireless devices send measurements to an IQ Home gateway over IQRF-DPA. The gateway exposes the data as a Modbus TCP slave, making each configured device and data point available through Modbus registers. Battery-powered sensors can remain in sleep mode while their last measured values are available to the Modbus client.

Modbus Mesh

Integration and scaling

The gateway can be added to an existing Ethernet network and used by any compatible Modbus TCP client. Multiple gateways and devices can be integrated into a larger monitoring system. Register maps, device addressing and network security settings should be verified during commissioning.


Discover systems utilizing this data output