CO2 + Temperature and Relative Humidity Sensor [SN-THC-02]

CO2 + Temperature and Relative Humidity Sensor [SN-THC-02]

Product Code: SN-THC-02
Availability: Pre-Order
  • 159.00€

  • 10 pcs: 143.10€

Available Options




The SN-THC-02 sensor is part of the IQ Home sensor family. These devices are developed to automatically collect measurement data and send it to your preferred data processing platform. The sensors run on Li-Ion batteries, which take a long time to run out.


The SN-THC-02 sensor is a CO2, temperature, and relative humidity measuring device. This makes it perfect to measure ambient air quality in huge offices and smart buildings. With these, you can easily control HVAC, BMS, IAQ, and the performance of test instruments


Key features:

  • Low power ISM frequency-based wireless sensor
  • Ready to use, IQRF-DPA compatible device
  • Single 3.6V Li-Ion Battery power supply
  • More than 3 years of battery life*
  • Easy-to-use communication protocol
  • Data collection from devices with one RF command

*Battery life depends on the frequency of the measurement, the sensor's sleep period, RF network size and topology, and operating temperature.


Package contains:

  • SN-THC-02 CO2, temperature, and relative humidity
  • 3.6V Li-Ion Battery (already installed into the product)
Temperature sensing
Measurement range 0 °C to +50 °C
Accuracy ±0.3 °C (typical)
Resolution 0.0625 °C
Relative humidity sensing
Measurement range 0 % to 85 %
Accuracy ±3 RH (typical)
Resolution 0.0625 %
CO2 concentration sensing
Measurement range 0 ppm to 5000 ppm
Accuracy ±30 ppm +/- 3% of reading
Resolution 1 ppm
RF Specifiaction
Communication technology IQRF - DPA
Communication module DCTR-76DA
IQRF-OS verision 4.03D
IQRF-DPA verision 4.11
RF mode Low Power
RF band 868 MHz (916 MHz on special request)
RF output power 8 mW
Antenna Internal, PCB
Local display and control
State feedback LED (Red/Green)
Environmental conditions
Operation temperature 0 °C to 50 °C
Storage temperature -20 °C to +60 °C
Relative humidity 0 % to 85 %
Electrical specification
Input power supply / Input voltage 2400 mAh 3.6V Li-Ion Battery (AA size) [Battery included]
Sleep consumption <1 uA (typical)
Idle consumption (RF RX active) 1 mA (typical)
RF TX consumption Maximum 22 mA (according to RF output power)
Sensor ready time < 10s
Mechanical and enclosure specification
Product dimension (outline) 80mm(W) x 80mm(D) x 25mm(H)
Mount type Wall mountable
Enclosure material ABS
Enclosure colour White
Product weight 80 g
Enclosure protection level IP30

Datasheets

Title Version Date
SN Series Sensor Datasheet 21.09 2021-09-09

Reference Manuals

Title Version Date
IQ Home Sensor Protocol Documentation DPA 4.11 2020-05-04

Application Notes

Online Tools and Calculators

Title Version Date
Sensor Battery Lifetime Calculator 2020-04-02

Video tutorials

Title Version Date
Introduction and Install 2023-02-20
Connection to Gateway (LAN) 2023-02-20
Adding a New Device 2023-02-20
Connection to Gateway (USB) 2023-02-20
The Scheduler Wizard 2023-02-20

Marketing Materials

Title Version Date
Indoor Air Quality 2019-07-09
SN Series Sensor Brief 19.04 2020-04-16

News and product updates